Mulyankan
CPWD DSR 2023

SH 10 — STEEL WORK

52 unique item codes, preserving 53 analysed item variants from the source workbook.

Items in SH 10

  1. 10.1Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing…₹117.35
  2. 10.2Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,…2 variants · ₹133.70
  3. 10.3Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat…₹11,439.60
  4. 10.4Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron,…₹6,566.20
  5. 10.5.1Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the…₹5,804.35
  6. 10.5.2Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the…₹5,563.75
  7. 10.6.1Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through…₹3,653.20
  8. 10.6.2Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through…₹3,307.05
  9. 10.6.3Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through…₹3,191.35
  10. 10.7Providing and fixing ball bearing for rolling shutters.₹492.35
  11. 10.8.1Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm…₹1,281.35
  12. 10.8.2Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in…₹1,181.80
  13. 10.9Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design…₹768.25
  14. 10.10.1Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse…₹82.45
  15. 10.10.2Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)₹40.80
  16. 10.11.1Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with…₹131.05
  17. 10.11.2Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with…₹128.25
  18. 10.12Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with…₹49.60
  19. 10.13.1Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and…₹141.70
  20. 10.13.2Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and…₹136.00
  21. 10.14.1.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet…₹583.30
  22. 10.14.1.2Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet…₹570.40
  23. 10.14.2.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet…₹611.75
  24. 10.14.2.2Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet…₹598.85
  25. 10.14.3.1Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet…₹640.20
  26. 10.14.3.2Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet…₹627.30
  27. 10.15.1Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type…₹195.20
  28. 10.15.2Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type…₹181.25
  29. 10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting,…₹194.40
  30. 10.16.2Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting,…₹206.35
  31. 10.16.3Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting,…₹194.40
  32. 10.17Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs…₹226.00
  33. 10.18Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73…₹220.65
  34. 10.19Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.₹97.20
  35. 10.21Providing and fixing M.S. rivets of sizes in position.₹278.30
  36. 10.22Welding by gas or electric plant including transportation of plant at site etc. complete.₹3.70
  37. 10.25.1Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a…₹123.60
  38. 10.25.2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a…₹172.60
  39. 10.26.1Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase…₹196.80
  40. 10.26.2Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase…₹205.75
  41. 10.26.3Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase…₹203.05
  42. 10.27.1Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded…₹131.10
  43. 10.27.2Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded…₹137.65
  44. 10.27.3Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded…₹170.95
  45. 10.27.4Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded…₹182.20
  46. 10.27.5Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded…₹224.50
  47. 10.28Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including…₹772.40
  48. 10.29.1Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts…₹844.70
  49. 10.29.2Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts…₹1,133.55
  50. 10.30.14.0 mm thick glass panes₹1,064.65
  51. 10.30.25.5 mm thick glass panes₹1,390.15
  52. 10.31Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5…₹130.50