DSR 2023 · SH 12 · ROOFING

CPWD DSR item 12.5 rate analysis

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Published rate₹738.65DSR 2023
Rate analysis

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

DSR rate₹738.65as per item analysis
Item code
12.5
Sub-head
SH 12 · ROOFING
Unit
See analysis
Source row
2738

Cost components

CodeDescriptionUnitQuantityRateAmount
Details of cost of 216.14 sqm.
Consider a shed of 20x10 metres. (External dimensions of plinth).
Area of roof-
20.2x10.70m = 216.14 sqm.
MATERIAL
Sheets used = 20 nos.x10.70mx1.06m = 226.84sqm
Add 3% wastage = 6.81
Total = 233.65sqm.
8671 Precoated galvanised iron profile sheet 0.50 mm TCT sqm 233.65 ₹380.00 ₹88,787.00
9977 Carriage of sheets L.S. 104 ₹2.27 ₹236.08
1023 Galvanised steel J or L hooks 8 mm dia 10 Nos 47.6 ₹130.00 ₹6,188.00
1208 Bitumen washer 100 Nos 4.76 ₹30.00 ₹142.80
1209 G.I. plain washer thick 100 Nos 4.76 ₹35.00 ₹166.60
9977 Carriage of bolts and nuts, washers etc. L.S. 8.06 ₹2.27 ₹18.30
9999 Sundries L.S. 39.52 ₹2.27 ₹89.71
LABOUR
0130 Mistry day 2.34 ₹897.00 ₹2,098.98
0112 Carpenter 2nd class day 9.34 ₹816.00 ₹7,621.44
0114 Beldar day 9.34 ₹736.00 ₹6,874.24

Rate build-up

TOTAL ₹1,12,223.15
Add 1 % Water charges on "W" ₹1,122.23
TOTAL ₹1,13,345.38
Add GST on "X" (multiplying factor 0.2127) ₹24,108.56
TOTAL ₹1,37,453.94
Add 15% CPOH on "Y" ₹20,618.09
TOTAL ₹1,58,072.03
Add Cess @ 1% on "Z" ₹1,580.72
Cost of 216.14 sqm. ₹1,59,652.75
Cost of 1.00 sqm. ₹738.65
Say ₹738.65

Use this rate in the interactive workbook

Search, temporarily edit basic rates, recalculate dependencies, and export from the existing DSR workbook.

Open DSR Workbook