DSR 2023 · SH 5 · REINFORCED CEMENT CONCRETE

CPWD DSR item 5.33.2.1 rate analysis

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum

Published rate₹9,860.40per 1.00 cum
Rate analysis

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.

DSR rate₹9,860.40per 1.00 cum

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg /cum

Item code
5.33.2.1
Sub-head
SH 5 · REINFORCED CEMENT CONCRETE
Unit
1.00 cum
Source row
3139

Cost components

CodeDescriptionUnitQuantityRateAmount
Details of cost for 1.00 cum
MATERIAL
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 0.57 ₹1,425.00 ₹812.25
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 0.28 ₹1,400.00 ₹392.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 0.85 ₹0.00 ₹0.00
0982 Coarse sand (zone III) cum 0.425 ₹1,450.00 ₹616.25
2203 Carriage of Coarse sand cum 0.425 ₹0.00 ₹0.00
0367 Ordinary/Pozzolana/Slag Cement tonne 0.33 ₹5,156.00 ₹1,701.48
2209 Carriage of Cement tonne 0.33 ₹0.00 ₹0.00
7318 Plasticizer / super plasticizer(0.50% of cement) kilogram 1.65 ₹30.00 ₹49.50
Production cost, pumping to respective floors and laying in position
0004 Production cost of concrete by batch mix plant / ready mixed plant. cum 1 ₹450.00 ₹450.00
0009 Pumping charges of concrete including hire charges of pump, carriage charges for all leads,piping work & accessories etc. cum 1 ₹250.00 ₹250.00
Labour for pouring, consolidating & curing
0155 Mason (average) day 0.17 ₹857.00 ₹145.69
0114 Beldar day 2 ₹736.00 ₹1,472.00
0101 Bhisti day 0.9 ₹816.00 ₹734.40
0012 Vibrator(Needle type 40mm) day 0.07 ₹400.00 ₹28.00
9999 Sundries L.S. 13 ₹2.27 ₹29.51
Extra cost of additional piping work and accessories etc. upto floor V level = 100% of P ₹250.00

Rate build-up

TOTAL ₹6,931.08
Add 1 % Water charges on "W" ₹69.31
TOTAL ₹7,000.39
Add GST on "X" (multiplying factor 0.2127) ₹1,488.98
TOTAL ₹8,489.37
Add 15% CPOH on "Y" ₹1,273.41
TOTAL ₹9,762.78
Add Cess @ 1% on "Z" ₹97.63
Cost per 1.00 cum ₹9,860.41
Say ₹9,860.40

Use this rate in the interactive workbook

Search, temporarily edit basic rates, recalculate dependencies, and export from the existing DSR workbook.

Open DSR Workbook