DSR 2023 · SH 12 · ROOFING

CPWD DSR item 12.64.7 rate analysis

Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 0.56mm Aluminium Circular (sinusoidal) profile with center to center pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width 1150mm.

Published rate₹1,012.15per sqm
Rate analysis

Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).

DSR rate₹1,012.15per sqm

0.56mm Aluminium Circular (sinusoidal) profile with center to center pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width 1150mm.

Item code
12.64.7
Sub-head
SH 12 · ROOFING
Unit
sqm
Source row
3457

Cost components

CodeDescriptionUnitQuantityRateAmount
Details of cost for 216.14 sqm.
Consider a shed of 20 x 10 meters.
(External dimensions of plinth)
Area of roof- 20.20x10.70m = 216.14 sqm.
MATERIAL:
Sheets used = 18 Nos x 10.70mx1.250m=
Total = 240.75sqm.
Add 3% wastage = 7.22sqm
Total = 247.97sqm
3057 Aluminium Circular(sinusoidal) profile sheet 0.56mm thick with center to center pitch of 75 mm, depth of 19 mm, overall profile width 1250mm,cover width 1150mm sqm 247.97 ₹534.00 ₹1,32,415.98
9999 Carriage of sheets L.S. 104 ₹2.27 ₹236.08
3074 Stainless steel self tapping screw of 6x50mm with SS hex cap and 3mm thick EPDM seal 100 Nos 8.65 ₹511.00 ₹4,420.15
(per sqm 4 nos) 216.14x4=864.55 no's
9999 Carriage of screws, washers L.S. 8.06 ₹2.27 ₹18.30
9999 Sundries L.S. 39.52 ₹2.27 ₹89.71
LABOUR:
0130 Mistry day 2.34 ₹897.00 ₹2,098.98
0112 Helper day 9.34 ₹816.00 ₹7,621.44
0114 Beldar day 9.34 ₹736.00 ₹6,874.24

Rate build-up

Total ₹1,53,774.88
Add 1 % Water charges on "W" ₹1,537.75
TOTAL ₹1,55,312.63
Add GST on "X" (multiplying factor 0.2127) ₹33,035.00
TOTAL ₹1,88,347.63
Add 15% CPOH on "Y" ₹28,252.14
TOTAL ₹2,16,599.77
Add Cess @ 1% on "Z" ₹2,166.00
Cost of 216.14 sqm ₹2,18,765.77
Cost of 1 sqm ₹1,012.15
Say ₹1,012.15

Use this rate in the interactive workbook

Search, temporarily edit basic rates, recalculate dependencies, and export from the existing DSR workbook.

Open DSR Workbook